Welcome to Energy Technologies' SiteEnergy Technologies, Inc. (ETI) power site covering hardened, high-reliability global UPS, Power Inverters, Solar Power, Battery Backup, Power Conditioning, Frequency Conversion, Power Distribution, Power Generation and Computer Peripherals that are the Standard used by industrial and telecommunications experts worldwide.
|
Through continuous updating and additions, we expect this site to be educational
and informative on the subject of high reliability applications and the associated
power conditioning and computer peripheral requirements.
 |
PowerStation™ hardened rackmount and NEMA UPS, Frequency Converters, Power Conditioners, Power Distribution Units (PDU), |
|
|
PersonalSource™ a balance between economical and high-reliability in desktop and rackmount UPS, |
|
|
NetworkPowerManager™ intelligent HTTP and SNMP managed power conditioners, UPS, PDUs and combinations thereof, |
|
|
TelecomPower™ telecommunication-grade Inverters, Converters, DC backup and Battery systems; |
|
|
MissionCritical™ redundant power systems, hardened computer peripherals and drive expansion units. |
Each of these products are modular in design and may be modified to suit a particular application or integrated into a total solution.
|
|
In hostile environments ranging from desert pipelines to off shore rigs to wind turbines to blast furnaces; |
|
|
Automation systems installed in factories, refineries, power plants and breweries; |
|
|
Critical communications at Embassies, Federal and Civilian Agencies; |
|
|
Homeland Security, 911 Systems, Emergency Vehicles and Command posts. |
|
|
Prime Contractors: Lockheed Martin, Raytheon, Northrop Grumman, General Dynamics, Boeing, SAIC, Hewlett Packard, Litton, L3 Communications, Telos, BAE, DRS, Lucent and numerous others. |
|
|
Industrial Firms: ABB, Alcatel, Bailey, Bayer, GE Wind Energy, Foxboro, Graybar, Honeywell, Miller Brewing, Solidstate Controls, Texas Instrument, Union Carbide and many others. |
More information can be found on the Company Information page.
New Products and Features
Extreme UPS are temperature hardened products in service around the country in unconditioned hostile environments. Most commercial UPS and Power Conditioning products are designed for controlled environments as found in computer rooms. The best of these have operating ratings of 0°C to +40°C (32°F to +104°F). However, in uncontrolled environments such as outdoor applications, those competing units typically fail due to temperature. Utilizing our certified environmental test chamber, ETI has designed and qualified the ExtremeUPS line to operating temperatures of -40°C to +65°C (-40°F to +149°F).
The ETI0001-1473AA is specifically designed for FAA rack systems providing high reliability, direct replacement for previous 120 VAC power conditioning and power distribution equipment. The ETI0001-1473AA does not require a separate PDU since the PDU functions are already integrated into the power conditioning module. This saves rack space, cabling and expense while improving overall reliability. The unit also has redundant/conditioned DC outputs. TheETI0001-1473AA can be easily upgraded to a UPS with the addition of its companion battery module. The ETI0001-1473A also provides backward compatibility for the 208 VAC version. The ETI0001-1473B version also provides backward compatibility for the 208 VAC version, but without needing the separate transformer module of the older equipment.
In making product evaluations today, the wise decision makers base their conclusions using Total Ownership Cost or TOC. Considering all factors, ETI products have the lowest TOC due to their overall performance and reliability. Besides the initial product cost, areas to consider are Installation, Training, Maintenance, Spares and Uptime. Products such as the ETI0001-N5 series integrate features that reduce the overall space and installation costs. Defense services and support contractors are already experienced with ETI designs and the products' operation. Manpower is a very significant factor in TOC. Very high reliability means minimal maintenance, which results in minimal manpower requirements. Once the ETI units are installed, they require very little or no preventative maintenance to keep them operational over the years. Very high reliability means a negligible spare parts requirement. If spares are desired, one set per site would be more than adequate for years of operation. Very high reliability means maximum operational uptime. Since failures usually interrupt operations at the most crucial times and since UPS or PDU reliability impacts multiple downstream loads, minimizing failures or downtime is imperative. ETI has field proven very high reliability and uptime. The Mean Time Between Failure (MTBF) exceeds 250,000 hours and the Mean Time To Repair (MTTR) is less than one half hour on most ETI products!
News
ETI Awarded
$1 Million Grant to Develop Fuel Cell Replacement for Generators
ETI
Opens New Research & Development Facility
Points Worth Noting
Most products sold in the hardened market start out as desktop or consumer products (Commercial Off The Shelf otherwise known as COTS). These vendors will attempt to "ruggedize" their product to compete in the hardened market. These ruggedized COTS products usually fail due to either temperature, mechanical shock or vibration requirements since they were not designed to withstand these extremes!
ETI's products start out hardened whether for COTS or full MilSpec applications. They are designed to and meet Military Environmental Standards. ETI's products have successfully passed these tests numerous times including Mil STDs 167-1, 810, 901D plus surviving the vehicle mounted endurance tests in the notorious Belgium Block and the explosive charges in the Barge tests.
In making product evaluations today, the wise decision makers base their conclusions using Total Ownership Cost or TOC. Considering all factors, ETI products have the lowest TOC due to their overall performance and reliability. Besides the initial product cost, areas to consider are Installation, Training, Maintenance, Spares and Uptime. Products such as the ETI0001-N5 series integrate features that reduce the overall space and installation costs. Defense services and support contractors are already experienced with ETI designs and the products' operation. Manpower is a very significant factor in TOC. Very high reliability means minimal maintenance, which results in minimal manpower requirements. Once the ETI units are installed, they require very little or no preventative maintenance to keep them operational over the years. Very high reliability means a negligible spare parts requirement. If spares are desired, one set per site would be more than adequate for years of operation. Very high reliability means maximum operational uptime. Since failures usually interrupt operations at the most crucial times and since UPS or PDU reliability impacts multiple downstream loads, minimizing failures or downtime is imperative. ETI has field proven very high reliability and uptime. The Mean Time Between Failure (MTBF) exceeds 250,000 hours and the Mean Time To Repair (MTTR) is less than one half hour on most ETI products!
Energy Technologies has been awarded GSA Schedule Contract GS-07F-9485G valid through February, 2012. For more details, refer to the GSA Page on this site. To further simplify procurement, ETI is now set up to accept Government IMPAC Cards, VISA, MasterCard and Discover Card.
Upcoming Trade Shows
Contact Information
|
 |
 |